3 Axles 40Ft Flatbed Trailer will be shipped to Ethiopia
Recently, Ethiopian customers ordered a couple of 3 axles 40ft flat bed trailer from TITAN Vehicle. At first, the Russian customer got to know our company through the introduction of a friend. It happened that the Ethiopian customer needed to transport containers recently, so they wanted to purchase a couple of flatbed trailer for container tansportation. The customer contacted our company and left an inquiry on the official website. Then, our sales staff warmly received him. In the process of communicating with the Ethiopian customer, our salesman provided him with professional advice and patiently answered every customer's question. Finally, the customer ordered a couple of 3 axles 40ft flat bed trailer from TITAN Vehicle after communicating with the sales.
Now, the production of the 3 axles 40ft flatbed trailers has been completed, and it is believed that it will soon be delivered to the Ethiopian customers.
3 Axles 40Ft Flatbed Trailer will be shipped to Ethiopia
The maintenance of the flatbed bed trailer should pay attention to the following points:
1. The connection between the supercharger and the intake and exhaust pipes of the flatbed trailer must be tight and cannot leak air. If there is air leakage between the exhaust pipe and the exhaust gas turbine, the efficiency of the supercharger will be greatly reduced, and the exhaust temperature of the diesel engine will rise sharply. And damage the valve and supercharger.
2. Before starting the new engine, the supercharger and supercharger oil filter must be filled with clean oil to ensure that the diesel engine starts together and the supercharger bearing can be lubricated. After the car travels 8,000 to 10,000 km, the oil filter element of the supercharger must be replaced.
3. Before the diesel engine stops, the flatbed truck should run for 3 to 5 minutes at idle speed to reduce the speed of the supercharger and the temperature, and monitor the running sound of the supercharger. If any abnormality is found, it should be stopped for inspection. If the rotor of the turbocharger is inflexible, there is sticking or wear noise, it must be sent to a qualified repair station for repair.
3 Axles 40Ft Flatbed Trailer will be shipped to Ethiopia
4. For the flatbed trailer, after every 500h or 30,000km of operation, check the clearance on the supercharger rotor shaft, and remove the dust and carbon deposits on the compressor turbine casing and rotor blades. At this point, the turbocharger should be removed from the diesel engine and the metal gasket between the exhaust pipes of the supercharger should be replaced. It is not allowed to use mechanical means to remove the scale on the rotor parts, but use gasoline or other cleaning solutions for cleaning aluminum parts
5. The lock nut of the supercharger compressor of the flatbed trailer cannot be disassembled, otherwise the dynamic balance of the supercharger rotor will be destroyed and the supercharger will be damaged.
6 For the flatbed transporter, do not damage or deform the rotating parts of the turbocharger that has been removed, otherwise it will affect the balance of the flatbed transporter's turbine. Likewise, any rubber seals must not be damaged.
3 Axles 40Ft Flatbed Trailer will be shipped to Ethiopia
Before starting the flatbed trailer, check the basic conditions to see if there are no obstacles around the flatbed trailer; whether there are suspicious oil or water stains on the ground where the flatbed truck is parked; and whether the tire pressure of the flatbed truck chassis is sufficient. Tire pressure is an important factor affecting the transportation safety of flatbed trucks, because the tires will compress and expand during transportation, which is the so-called tire deformation, especially when the tire pressure is low and the vehicle speed is high, this phenomenon is even more serious. Obviously, the internal temperature of the tire at this time is abnormally high, which may cause the separation of the rubber layer and the cover layer, or the breaking and scattering of the outer tread rubber, which may cause the tire to burst and cause vehicle accidents. Therefore, in any case, the tire pressure of the flatbed trailer must be guaranteed to the specified value in the manufacturer's standard. Appropriate tire pressure also has a great impact on the fuel economy of flatbed trucks. Improper tire pressure will increase the rolling resistance of the flatbed truck tires, thereby increasing the fuel consumption of the flatbed truck.
Drawing of 3 Axles 40Ft Flatbed Trailer
The phenomenon of gear disorder is one of the most common failure phenomena of manual transmission. The phenomenon of low-plate manual transmission disorder refers to the fact that the transmission is in two gears at the same time when the clutch technical condition is normal, or the result is linked to another gear when the gear is required. 's gear. There are very few reasons for this kind of failure, so correspondingly, its elimination methods and solutions are also much less. First, the failure of the interlocking device: such as the fork shaft, the interlocking pin or the interlocking steel ball is too worn. Second, the arc-shaped working surface of the lower end of the shift lever is too worn or the groove of the shift block on the shift fork shaft is too worn.
The third point is that the positioning pin of the shift lever ball head is broken or the ball hole and ball head are worn too loosely, which will also cause the phenomenon of low-plate manual transmission to skip gears. In short, the main reason for the disorder is caused by the failure of the transmission operating mechanism. With the above three points of analysis, we come to a one-to-one corresponding diagnosis and exclusion.
You can download video, you can learn about different types of flatbed semi trailer, such as 2 axle flatbed semi trailer,3 axle container semi trailer,4 axle 40ft flatbed semi trailer, etc. As well as the process, testing, packaging and customer feedback, etc.
