Low loader trailer stock sale, send inquiry to get $500 discount!
Low loader trailers are usually used to carry construction and engineering plant or wide and high loads. They come in a number of configurations and some low-loaders can be extended to accommodate especially long loads. The loading capacity can customize according to your requirement.
3 axle low loader trailer for sale
Low loader Specifications:
Tare weight: About 8.5-13T
Dimension: 13000mm x 3000mm x 3400mm
Loading capacity(T): 40-100T
Axle: 13T/16T, FUWA / BPW / TITAN Brand
Rim: 8.0-20 or 900*22.5
Tire: 8.25R20/10.00R20/11.00R20/12R22.5
Suspension: Mechanical suspension or air suspension
Spring leaf: 120(W)mmx16(Thickness)mmx10 layers
Kingpin: JOST brand 2.0 or 3.5inch(bolted or welded type)
Landing gear: JOST brand
Main beam: Height: 500mm-550mm, Upper plate: 16mm-25mm, Middle plate: 12mm-20mm, Lower plate: 18mm-25mm, Material: Q345B steel.
Bottom Platform: 4-6mm thick checkered plate
Ramp: spring or hydraulic type
Gooseneck: Optional
ABS: Optional
Valve: WABCO valve
Light: LED light (specially intended for oversea markets)
Voltage: 24V
Tool box: 1 set
Painting: Sandblasted, anti-rust chassis surface is available with 1 layer of anticorrosive primer and 2 layers of top coats.
Shipping terms: Transported by the bulk carrier in an RORO or 40HQ container
Low loader dimension
Low Loader Trailer Advantage:
TITAN Low loader Trailer main beam adopts Q460C High Strength Steel Material
- Q460C steel has high yield strength, more durable and stronger than ordinary steel, and its loading capacity is 5 times more than the low loader which is built by Q345 steel. - Each ton of Q460C high strength steel costs double the price of ordinary Q345 steel material, ensuring that our TITAN low loader trailer will have a long service life and to avoid unnecessary maintenance costs.
Other factories low loader trailer
- The yield strength of Q345 steel is just 345Mpa, so it can not meet the high loading capacity requirements and the main beam of the heavy haul trailer would be broken when the excavator trailer is overloading.
- Q345 steel is low-cost steel, with short service life, increase maintenance costs and also can not meet load requirements on different kinds of roads.
Low Loader Trailer ramp & main beam
1. Main beam
500mm thickened Main Beam (Q460C high strenght steel)
TITAN heavy haul trailer adopts 500mm main beam, effectively increase 10% loading capacity than the normal excavator trailer which uses 450mm main beam, and ensure the main beam resistance to twisting forces, shock and bump, meet load requirements on bad road, even no road.
300mm width Main Beam
TITAN low loader trailer adopts 300mm width main beam, increase 20% loading capacity than the normal low loader trailer which uses 140mm width main beam, ensure driving smoothly.
2. Side beam
300mm Height 'I' Steel Side Beam
The side beam of TITAN low loader trailer adopts 300mm "I beam" design, and its loading capacity is 2 times more than the normal heavy haul trailer which uses 250mm side beam.
10mm thickness Side Beam
TITAN low loader truck is produced by 10mm thickness side beam, its loading capacity is much higher than the normal low loader trailer which uses 4.5mm thickness
3. Strong ramp
The loading ramps are made of T700 high strength steel, with high loading capacity, will not happen to the deformation when carrying heavy equipment.
